How to choose the right flowerpot
Release time：
2023-01-12
eatures: The basin is essentially a root-control basin, with a large number of pores embedded on the wall of the basin, and the distribution is relatively concealed, basically concentrated in the side seam...
Differences between three common flower pots
The first is Qingshan basin.
1. Features: The basin is essentially a root-control basin, with a large number of pores embedded on the wall of the basin, and the distribution is relatively concealed, basically concentrated in the side seam; For the bottom of the basin, there is also a special leakage design, and the bottom depression is covered with multiple seepage holes.
2. Benefits: First, it is obvious that the green mountain basin has good ventilation and drainage, and the plant is easily not afraid of waterlogging; On the other hand, because plant roots are naturally water oriented, they often grow, and the root tip will gradually face down. It is not like being in a common flowerpot, where the root system circles in the middle and lower part of the pot, which can control the growth of the root system.
3. Disadvantages: The water loss rate in the basin is very fast. If hydrophilic plants are planted, there may be a high probability that water will not be replenished in time. At the same time, the basin soil can be watered thoroughly once in the past, but now it is replaced by a green mountain basin, sometimes it may not reach the goal after 2-3 times.
The second is plastic basin.
1. Benefits: cheap, practical, portable, durable, easy to clean.
2. Disadvantages: poor ventilation and drainage, not environmentally friendly; There are potential safety hazards. Some businesses sometimes use harmful plastic to make flower pots in order to make huge profits, which not only hinders the growth and development of plants, but also may cause harm to human body over time.
The third is the gallon basin.
1. Features: The whole body is green. Without accident, the flowerpots grow exactly the same, only different in size. It is easy to identify and can be recognized at a glance.
2. Advantages: In flowerpots of the same specification, the price is relatively low; Good water retention; High hardness, good bearing capacity, extrusion resistance, easy to damage or deformation; Light and easy to move.
3. Disadvantages: fixed and single shape; Poor air permeability, and the evaporation rate of water in the basin is significantly slow; The plants planted in this pot are prone to root problems. If you are careless, the root system may suffer first, and none of them will escape.
Related news
CONTACT US
TEL: +86-768-3288328/ 2807088
FAX: +86-768-2807299
E_mail: contact@czjiayu.cn
Add：（D2-3-1）EAST OF FACTORY BUILDING,CHAOZHOU DEVELOPMENT ZONE, GUANGDONG, CHINA
QR code
